There’s a need for some cleaning or fixing around the house, and you’re eager to get started. You grab a rag and your toolbox because nothing beats doing chores along with listening to your favorite tune. But, do you know how to remove a kitchen faucet without a basin wrench in a professional way?
What You Will Need To Prepare?
Sometimes a small repair is all that is required for your kitchen faucet. That’s quite fantastic! However, if you need to replace it and choose a new kitchen faucet, that is also thrilling! Before embarking on this major expedition, ensure you have everything ready, including equipment, components, and understanding of the procedure!
You will need a toolbox. You will not complete your assignment if you do not have all of the necessary supplies on hand. Use a ratchet and an adjustable wrench (you can use a socket wrench instead of a basin wrench).
Guide To Remove Your Kitchen Faucet Without A Basin Wrench
Step #1: Find The Waterline And Secure All Valves
To lessen the possibility of a water main break, ensure all water lines are turned off as a precaution. The main water valves in your home may be found in the kitchen area, where there should be an access panel beneath the sink with these on/off valves.
Turning off the water supply to your kitchen is preferable to avoid overflowing the sink while working on something crucial. Put a bucket beneath the faucet and cover the hose connector with your hand to prevent dripping on the floor while you do other things.
Step #2: Open The Spigot
Now that you’ve turned off the valve and opened one side of it, the water under pressure has nowhere to go but out. It’s going to run out through the faucet. And the water will continue running out until the air pressure inside the fixture is depleted.
The thing is, this siphoning process might take some time, depending on how much water is in there. That’s why you should open the spigot and let the pressure escape, avoiding overload.
Step #3: Disconnect The Water Piping
Water and electricity, you know, may be quite deadly when combined. And when water encounters cuts in the lines (as you could find during repair work), it can cause a slew of issues, even fatalities! As a result, always turn off the water supply before performing any repairs.
But it’s also important for you to remember that you don’t have to forget about all of your other tools during the process of your work. Things like metal cutting saws are very useful in delicate circumstances during a repair job, just not when you want to fix some faucets. In that case, water pump pliers will get the job done safely and much more quickly!
By hand: First, take care of and meticulously check the water lines. Then gently twist onto the waterline with pliers. Once you’re done with one, it is important to let your hands stay away from the faucet.
This is because any sudden movements or vibrations can damage delicate parts, some of which are very important!
Step #4: Loosen all the Nuts Or Screws
After removing the water line from the faucet, these are the actions to take. Seek out nuts (or screws). The first type secures the plumbing pipe to the spout of your faucet.
To loosen them, use a socket wrench. If they don’t budge, try slathering them with oil to loosen the joint.
Step #5: Remove The Hose
Once you’re finished taking out the nuts, soon you’ll be pulling loose that pesky hose. Before we do, however, remember to save the little parts like nuts and screws; you’ll need them later on when it’s time to put everything back together!
Next — hold that hose with two hands and pull it out of the sink. Look for any corrosion or cracks in your faucet when you’ve done so. You might even want to test its functionality by turning on your tap and seeing if water comes out of it or not.
If it doesn’t, please don’t worry; this is something we can fix easily enough. We need to go and purchase a new faucet and put everything back together!
FAQs
What Should I Do If The Nuts Are Too Tight?
The easiest way is to apply heat to it. Because nuts are made from metal materials, they will expand when exposed to high temperatures, and from there, they will gradually loosen. The ideal time to apply this method will be about 1 to 3 minutes.
What Does A Basin Wrench Look Like?
A basin wrench is an ingenious tool with two grip rings that join a screwdriver-like handle at the top. An open ring allows for 360-degree movement, while a smaller ring only provides forward and backward motion.
Are There Any Alternatives To Grease?
There are a plethora of alternatives to grease. Conventional products, such as aloe vera gel, virgin olive oil, and virgin coconut oil, are easily attainable at your local store.
What Can I Use Instead Of A Plumber’s Wrench?
Tongue-and-Groove Pliers (also known as channel-type, slip-joint, or Channellock pliers in the U.S.) have replaced the Pipe Wrench for most industrial settings because the former is more versatile.
Conclusion
We hope you’ve enjoyed our roundup of how to remove a kitchen faucet without a basin wrench.
We know that it’s frustrating to want to replace your faucet but not remove the old one. So, if you’re ever in that situation and don’t want to call a plumber, you can find some useful tips in this article. Also, you should always check the manufacturer’s instructions before starting a project like this.
